Surface Preparation: Ensure that the surface to be repaired is clean and free from loose material, oil, grease and standing water. Edges of the area to be repaired should be formed vertically as far as possible.

Application: RHEOSEAL IRR is supplied as ready to use and does not need any mixing prior to application. Pour the product directly into the pothole to be repaired and spread using a trowel, spatula, rake or shovel to form a layer which is slightly above the level of the surface to be repaired. A maximum of 50mm thickness can be compacted in a single layer. If the depth is more than 50mm it shall be compacted in different layers of 50mm or less. Compact the repaired area immediately by tamping, using a mechanical vibratory plate compactor or a road-roller for large areas. Complete curing takes several hours, depending on the surrounding temperature. Light to medium traffic passing over the repaired area will assist in the compaction of the product without damaging it. In areas where vehicles have to manoeuvre, do not go over the surface that has been repaired until the product has completely hardened.